Watt Metal Halide Grow Light
Lighting Considerations in Indoor Hydroponics
Lighting is of crucial importance to plant growth and plays a key role in determining plant yields. Hydroponics growing equipment manufacturers have, therefore incorporated a wide range of lighting system designs to meet specific requirements of different plants that are grown in indoor grow rooms.
Lighting requirements vary, depending mainly on the plant type, the area over which the plants are grown and the proximity of the plant to the light source. The most important consideration is the lighting level that a particular plant needs for healthy growth. Some plants like houseplants and ferns do not require as much light as salads and culinary herbs while tomatoes, orchids and flowering plants require the maximum amount of lighting. It has been observed that indoor growers typically tend to under-illuminate their indoor grow rooms as they try to cover too large an area with the available light. They need to understand the importance of adequate lighting bearing in mind that a smaller area that is adequately lighted will produce better results than a larger one with inadequate lighting.
Fluorescent Lighting
Fluorescent lamps are ideally suited for small scale salad and herb gardens and for the production of seedlings and cuttings. T-5 Fluorescent lights are suitable for slightly larger plants as the T-5 fluorescent bulbs are about equal in PAR value to a 400 watt Metal Halide light. These lights need to be kept close to the plants on all sides, but will grow fabulous plants with short internode distances as long as the plant are not too large. T-5’s are best suited for vegetative growth.
High Intensity Discharge Lighting
Vegetables, flowers and several other plant varieties do best with all the light they can
get and the modern HID lights provide just what they need. HID lighting has developed with improvements in lamp and reflector design from a piece of equipment for specific needs to an almost “plug and play” use for the lay person. HID lights come in two designs – with remote ballasts and as integrated ballasts. The remote ballast design has the advantage of only its lightweight reflector unit needing to be suspended from the ceiling; the integrated design requires the full unit including the heavy ballast to be suspended.
HID lighting comes in two basic types- Metal Halide and High Pressure Sodium. Metal Halide HID lighting produces a blue white light, and has been recognized as especially well suited for overall plant growth, while the High Pressure Sodium which produces a red/orange light is better suited to the flowering and fruiting period during which plants can more readily make use of it. Both types of HID lighting are in use with growers either alternating the two according to the plant growth cycle or mixing the two throughout the crop. However, the latest design of Sodium lamps which are now available in the “Agro” or “PLANTA” range can provide the light energy required during the entire cycle of plant growth and are being increasingly used by professional growers.
HID lights are available in wattage from 250 upto 1000 watts and beyond. The lamp which gives the maximum light output, watts used to lumens given is the 600 watt sodium lamp, producing 92,000 lumens.
Reflector
While it is important to use the right lamps to generate the right amount and type of light, it is equally important to ensure that the light is directed in a manner that ensures minimal wastage. Reflector design plays and important role in maximizing light utilization; a well designed reflector can be as much as 30 % more effective than a poorly designed reflector in terms of its capacity to minimize light wastage. The most efficient reflectors now in the market feature designs generated using computer aided modeling techniques. These designs maximize light reflection onto the plants and enhance lamp life.
1. Light Movers
In addition to efficient light reflectors, rail systems that enable movement of lamp to ensure light exposure to the most remote plant go a long way in enhancing light utilization. A rail system called the Light Rail 3.5 has proved to be particularly effective in improving light utilization and should be considered by those who have a rectangular growing area. This is a simple device that uses a six foot rail with a precision engineered carrier that moves the light back and forth over the growing area. The Light Rail 3.5 system offers several advantages- it covers a greater area and ensures that all plants receive the same amount of light; it eliminates having the plants moved around for light exposure and it eliminates shadows thus ensuring uniform plant growth. It also affords closer exposure of plants to light without burning the foliage. There are other systems that move the light along a circular path, these are more suited to square grow rooms. Some systems also allow combination lighting with a Metal Halide Lamp on one arm and a High Pressure Sodium on the other, or 4 different ceramic bulbs on 4 separate arms, each giving a different color temperature. These 4 different bulbs combine to make one very full spectrum when mixed via a circular or rotating light mover.
2. Reflected Light
Reflective surfaces around the growing area can make a difference in the amount of light that plants will receive. Poor reflectivity of the surfaces around a plant will diminish the amount of light as the surfaces will absorb most of the incident light. It is not difficult to ensure highly reflecting surfaces around the plants in a grow room. Walls can be easily painted with flat white paint, which is an excellent reflector. If this is not possible the walls can be covered with black/white plastic film which can also be used for the floor. Polystyrene foam sheeting can also be used as it is a good reflecting surface. The most reflective floor covering is brilliant white vinyl. It is tough and hard and makes an ideal reflecting surface. Finally, there is MYLAR, the most reflective material that can reflect 92 % of the light it receives.
3. Timers
Automatic turning on and off of the lighting system requires the use of an efficient timer. Incorporating a timer in the lighting system ensures that the plants in the grow room are exposed to light for the “on” set time after which the lights are switched off for the “off” set time. The continuous uninterrupted repetition of this on/off cycle is essential; a reliable, good quality timer is therefore important. It is best to avoid ordinary non-grounded plug-in timers as these are prone to failures causing disruption of flowering cycles in certain plants and increased power bills.
Power Consumption
Power consumption is one of the factors that need to be considered while working the economics of the project. However, this should not ordinarily deter the beginner as the
costs involved are surprisingly small. The beginner should work out the power requirement and its economics at the outset to avoid problems later.
Warning
Grow-rooms can be damp and humid. All electrical equipment, fittings and accessories should be carefully located to avoid any contact with water splashes. It is advisable to seek the help of a licensed electrician while installing the electrical system.
About the Author
Know more about indoor grow tents! Visit indoor grow chamber site.
How to Build a High-Tech Indoor Garden This Winter
The dark days of winter are upon us, but that doesn’t mean you have to give up on gardening until the spring. Grow lamps are becoming increasingly popular in gardening circles these days.
 |
US $22.50
| Powered by phpBay Pro |
 | Hydrofarm SBM175H 175-Watt Mini Sunburst Metal Halide with Lamp List Price:  |
DescriptionPlug-and-play: comes with cord and lamp.Highly reflective European specular.Magnetic 175W MH Super quietEasy to hang lightweight and compactIncludes instructions hangers and lighting recommendations |
 | Sunshine Systems LEDGP45 GlowPanel 28 Watt 45 LED Grow Light List Price: |
DescriptionGlowPanel45The GlowPanel 45 uses the latest in LED technology to provide your plants with the perfect blend of light suitable for all stages of growth. From seed to flower to fruit. More than four times the output of the original GlowPanel, the GlowPanel 45 uses only 28 Watts of power and surpasses the output of a 250 Watt HPS... |
 | Sunshine Systems LEDGP14 GlowPanel 14 Watt LED Grow Light List Price: |
DescriptionGlowPanel LED grow lights provide your plants with a balanced spectrum of light for healthy & vigorous plant growth. GlowPanels consume 80% less energy than HPS or Metal Halide grow lights and produce virtually no heat... |
 | Lumatek 600W 120/240v HPS/MH E-Ballast - Generator Ready List Price: |
Description600W 120/240v HPS/MH E-Ballast - Generator Ready The market's most popular and best E-ballast has been improved. The Lumatek E-ballast is a performance leader. Powers both metal halide and high-pressure sodium lamps (except the 750W model, which only powers HPS lamps)... |
 | Sylvania 64490 - M400/U 400 watt Metal Halide Light Bulb Sale Price: $8.00 |
Description400 watt BT37 Mogul Screw (E39) Base 4,000K Clear Universal Burn General Lighting Metal Halide HID Sylvania Light Bulb |
 | Sylvania 64417 - MP100/U/MED 100 watt Metal Halide Light Bulb Sale Price: $14.99 |
Description100 watt E17 Medium Screw (E26) Base 3,000K Clear Universal Burn Open Fixture Rated Metal Halide HID Sylvania Light Bulb |
 | Hydrofarm BUSUHL1THHZAS 1,000-Watt Agrosun Gold Halide Horizontal Grow Light Bulb Sale Price: $70.84 |
DescriptionAGROSUN Gold Halides make plants grow their best! A Hydrofarm exclusive, these spectrally enhanced halides are the best all-purpose growth and fruiting/flowering light you can use. They emit more of the red wavelengths than the common halides... |
 | New Digilux DX1000 HPS 1000W Digital Grow Light Bulb Sodium Hydroponics Quality Sale Price: $67.99 |
DescriptionDigilux Metal Halide and High Pressure Sodium bulbs are favored by growers because of the wide color spectrum and efficiency. They are engineered for use in digital ballasts and feature enhanced red and orange spectrums (HPS) blue spectrums (MH), better color uniformity, longer bulb life, and less lumen depreciation... |
 | 600w Galaxy Digital HPS Ballast List Price: |
Description600 watt Digital Galaxy HPS/MH Ballast Extruded aluminum housing is engineered to dissipate heat and keep the components cool. Smart Volt feature allows ballast to run on 120v, 208v or 240v power. Detachable power cord allows easy change over... |
 | Digital Greenhouse 1000w HPS Grow Light w/ Maxwing Reflector List Price: |
DescriptionThis light is made for growing plants, quiet, safe, powerful, efficient and comes with 1 specialty high output HPS grow bulb. This system is complete and ready to grow! Plugs into a standard household outlet! This 1000 watt system is recommended for gardens anywhere between 6 x 6 (floor space) to 10 x 10. |
"Capture the Glow" Connor Millican (Flophouse Series)
